What are the common safety hazards in Rapid Sheet Metal Fabrication?

October 02, 2024

Sheet Metal Fabrication is a process of manufacturing Sheet Metal Parts through operations that include forming, cutting and welding and this hence has a number of risks with regards to safety. It is thus important to be conversant with these hazards as this will help in eliminating these dangers in working environments. Below are a few common safety hazards in sheet metal processing:

1. Mechanical injuries:
Pinches and entanglements: Some of the associated dangers include cutting of cloths or human limbs by the moving parts of shears and presses, which are used in high-speed machines.
Cutting Injuries: In the incorrect operation of sharp tools and the molds, an individual is likely to have a cut on his or her hand.

2. Fire and Explosion:
Spark initiation: Such processes as welding and grinding may cause sparks that ignite oil, papers, or flammable gases.
Electrostatic discharge: For instance in activities like powder coating the build-up of static electricity will lead to an explosion.

3. Electrical hazards:
Risk of electric shock: Accidents which may result in electric shock includes; Ungrounded equipment, broken wires, wet working conditions.
Short circuit and arc flash: The failure of a circuit or its improper usage may lead to an arc flash that may lead to burns.

4. Falls and stumbles:
Working at Height: If safety measures are not followed while installing a roof or overhauling the existing one, there is a chance of falling.
Slippery floors: Such floors may be slippery, wet or filled with debris and this tends to make people to slip or even trip.

5. Hazardous substance exposure:
Inhalation of dust: Kawasaki conduct cutting operations, drilling and other processes and generate metal dust which if inhaled in a long span contributes to lung disease.
Harmful gases: Some of the gases emitted during welding process include carbon monoxide, nitrogen oxides which have negative impacts in respiratory tract.
Chemical exposure: It should be noted that some of the products that may be used in cleaning the area such as cleaning agents, paints, and solvents are Radioactive and may cause skin irritation or poisoning.

6. Noise pollution:
Hearing damage: High decibel machine operation sounds are dangerous since they can lead to permanent hearing loss within a short time/frame.

7. Visual Harm:
Bright light and radiation: Both the UV and IR radiations emitted from the welding process may affect the eyes causing even cataracts.

Author:

Ms. Lee

E-mail:

sales@tonjaism.com

Phone/WhatsApp:

8615817653953